Shower screen is a great way to keep water from spraying all over your bathroom, and they can add a touch of elegance to the room. If you’re thinking about installing shower screens, you should keep a few things in mind. First off, you’ll need to ensure that the shower’s drain is wide enough for the screen. The drain opening should be at least 1 1/16″ in diameter. The screen’s length should be at least 3 times the width of the drain opening.  The screen’s height should be at least 1 1 2″ above the shower floor.

Size:

It can make your shower look crowded, and it’s hard to find a spot for the fixtures if your screen is too big. Shape In addition to size; you should consider whether you’d like a rectangular or square shower screen.

Type:

 Framed screens have a metal frame around the edge, while frameless screens are completely transparent. Semi-frameless screens have a frame around the edge but a panel on the inside that leaves a gap for more water to pass through.

Frameless screens are easy to clean and don’t allow any dirt or debris inside. Privacy If you want privacy in your shower, you’ll need a shower screen that’s not transparent. A transparent screen lets you see through it. Also, if the screen is transparent, you’ll need to buy a privacy screen designed specifically for showering.

How to install a shower screen

Installing shower screens is a great way to keep your bathroom neat. It can also add some extra privacy while you are taking a shower. In this article, we will show you how to install a shower screen in just a few simple steps:

Step 1: Measure the area where you’re installing your shower screen. It is a very important step as you don’t want to install your screen in a place where it will interfere with other plumbing or electrical work.

Step 2: Cut the shower screen using a pair of scissors.

Step 3: Turn the shower screen around and place it against the wall. If you are installing a wall-mounted screen, you will need to drill small holes in the back of it so that it can be screwed into the wall.

Step 4: Make sure that the screen is straight and level. Then, make small marks on the screen with a pencil to indicate where it needs to be cut.

Step 5: Use a utility knife to cut along your pencil marks.

Step 6: Cut the screen to have a piece that is no wider than two inches. If it is wider, extra pieces will be required to make up for the excess space.